FontanaAeroStream™ Oil Rubbed Bronze Touchless Faucet FAQ
Dual-Sensor Calibration, IP65 Valve Protection; Oil Rubbed Bronze Finish Care
The FontanaAeroStream™ Oil Rubbed Bronze automatic faucet combines solid-brass construction, adjustable dual-sensor activation, single-hole deck mounting, AC220V or DC6V power, IP65 waterproof protection, and operation across a 0.05–0.7 MPa water-pressure range.
How should the adjustable 18 ± 2 cm sensing distance be commissioned?
Complete sensor adjustment after the basin, mirror, backsplash, soap dispenser, and countertop accessories are installed. Test normal hand-entry positions and reduce the sensing distance if reflective surfaces or nearby movement cause false activation outside the intended washing zone.
What should be checked if the dual sensors activate inconsistently?
Clean both sensor windows, verify stable AC220V or DC6V power, inspect the wiring connections, and remove reflective objects from the detection area. Also confirm that the faucet body is securely mounted because movement or incorrect alignment can change the effective sensing field.
How should the faucet be pressure-tested without damaging the internal valve?
Flush the supply line before connection, confirm that operating pressure remains within 0.05–0.7 MPa, and inspect the inlet filter for debris. Test activation and shutoff repeatedly while checking every connection for leakage, pressure fluctuation, or delayed valve closure.
How should the Oil Rubbed Bronze finish be cleaned without changing its coloration?
Remove fingerprints, soap residue, and water spots with a soft damp microfiber cloth, then dry the faucet immediately. Use diluted pH-neutral soap only and avoid acidic descalers, bleach, ammonia, abrasive pads, steel wool, and polishing compounds that may alter the bronze surface.
Stream Strength 
