Home > Installation Instructions For Luxury LED Rainfall Thermostatic Music Shower System 24 X 24 Inch

Luxury LED Rainfall Thermostatic Music Shower System


Modern Stylish Design Completely made to match or stand out from your other bathroom fixtures. High Quality. This modern musical shower system is made out of brass, so its made to last!

Luxury LED Rainfall Thermostatic Music Shower System Features:

  • Brand Name: Fontana Showers
  • Model Number: FS1204
  • Type: Shower System
  • Material: Solid Brass
  • Showerhead Finish: Oil Rubbed Bronze
  • Style: Contemporary
  • Shower system Feature: Multifunction shower with Bluetooth music
  • Showerhead Mount Method: Ceiling Mount
  • Showerhead size : 24 inch x 24 inch
  • Showerhead Connection: 1/2" US standard (included)
  • Special Feature: Music bath
  • Bluetooth wireless music player
  • Mobile wireless WIFI Control
  • Intelligent thermostatic mix valve
  • Knob switch
  • 24-button infrared Bluetooth RGB Controller
  • Play music while showering : Change the color of RGB LED through the rhythm of the sound input from the phone microphone
  • Stainless Steel top tray
  • Intelligent constant temperature
  • Remote controlled
  • Luxury LED Rainfall Thermostatic Music Shower System 24 X 24 Inch

    FontanaShowers® Product Warranty Information FontanaShowers Product Warranty

    Before you begin, please read the installation instructions below. Observe all local building and safety codes.

    • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
    • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
    shower

    Shower Head Installation Instructions


    LED Remote Control remote
    control
    Bluetooth Connection Steps

    24 Button infrared Bluetooth RGB Controller

    Size Parameters


    Note:
    1. The power supply voltage of this product is DC5V-24V, it must not be connected to other voltages.
    2. The lead wires should be correctly wired according to the colors and labels provided in the wiring diagram.
    3. This product cannot be overloaded.
    4. If you cannot search for the LED controller and cannot connect with the Bluetooth device, please turn off Bluetooth in your phone settings & turn back on and then connect again.
    5. If you cannot connect to the device for a long time or other abnormality, please close the application and try to Restart.
    6. Do not place the LED Bluetooth controller in a closed place with high temperature, humidity or water.
    7. Non-professionals do not open the closing device at will.


    Step 1: Step 2:
    showerhead
    LED Shower Head Installation Instructions
    Step 3: Step 4:
    According to the dimensions and shape of the mounting bracket, determine the bracket location to be installed in the ceiling. According to the 8 mounting holes on the mounting bracket, use an Electric drill to make the mounting holes.
    Shower Head Installation Instructions
    Step 5: Step 6:
    Using the two hexagonal nuts adjust the distance between the mounting bracket and the ceiling, and keep the mounting bracket on the level.
    Use an explosion screw to fix the mounting bracket on the ceiling, pay attention to the explosion screw, it can adjust the height and use level tool to adjust the mounting bracket to reach level.
    Connecting Circuits





    Shower Head Installation Instructions
    Step 7: Step 8:
    According to the chart shows: Raise the showerhead, Aim at the hole of the bolt, plug the bolt.





    Use a Phillips screwdriver screw out the upper cover 4 screws, open the plastic waterproof boxes.
    Note: The same color line docking, brown line for line, the blue line is zero line. Use a Phillips screwdriver screw out the screws in plastic waterproof box wiring position, then put the fork terminal line connected, then fix it with a Phillips screwdriver.

    Shower Head Installation Instructions
    Step 9: Step 10:

    According to the circuit diagram as shown in step 5, then connect plastic waterproof case, please note that the same color of the wire when connecting circuit to docking. Connecting water hoses and Tee joints and then connect the water hoses to the water inlet pipe connector.
    LED Shower Head Installation Instructions
    Step 11: Step 12:
    Connecting 4 pcs water hose to 2 Tee joints and G1/2 joints in the middle and then put another side of the shower hoses through the showerhead side holes. Installing the shower body by plugging the bolts. (As the above picture).

    LED Shower Head Installation Instructions
    Step 13: Step 14:
    Install the decorative panel and twist the corresponding 8 fixing screws with a SW4 hex wrench. Install 4 LED lights and lamp cups clockwise.

    LED Shower Head Installation Instructions
    Step 15: Step 16:
    Note: 1. Before connecting water hoses and water pipes, cleaning the water pipes first. It will prevent impurities from clogging the showerhead. 2. When connecting water pipes and hoses, don't forget to put the G1/2 filter net in the water hoses, filtering impurities. Connect 4 water inlet hoses to the wall-embedded water inlet pipes and then seal the wall.



    LED Shower Head Installation Instructions

    Spout & Hand Held Shower Installation Instructions


    Step 1: Step 2:
    HandHeld
    Shower
    Hand
    Held
    Shower

    Handheld Shower
    Step 3: Step 4:



    Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow.

    Note:
    This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.
    • Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint.

    Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.




    Shower Thermostatic Mixer Installation Instructions

    Step 1:Step 2:
    Mixer Valve

    Release 4 handwheel levers according to the above directions.
    Take apart the embed valve, panel, and handwheel.
    Mixer Control Valve Installation Instructions
    Step 3:Step 4:

    Dig the embed space for the pipe on the wall according to the specification of the valve.
    Dig 4 holes according to the position of the screws.

    Use a hammer to thwack the screws into 4 holes.
    Fix the valve body with 4 screws.

    Mixer Control Valve Installation Instruction
    Step 5:Step 6:
    Find out the expansion screw heads with washer and spring washer. Use copper sleeve wrench to lock the screw heads with the embed valve body.After connecting all the pipes and before sealing the wall with concrete, confirm no leaking problem occurs when you turn on the water.
    Mixer Control Valve Installation Instruction
    Step 7:Step 8:
    Fix the decorative panel on the embed valve body.Screw the handwheel arms with the handwheels.
    Mixer Control Valve Installation Instruction
    Step 9:Step 10:
    Mixer Control Valve Installation Instruction
    Step 11:

    Mixer Control Valve Installation Instruction


    How to install the Shower Set with Showerhead, Spout, Hand Held Shower and Shower Mixer


    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions