 |
 |
 |
|
 Fontana Commercial Chrome Automatic Touchless Sensor Faucet with Manual Soap Dispenser
Constructed of brass and complimented with a beautiful chrome finish, this automatic faucet prevents cross-contamination of germs
and bacteria by eliminating the need to touch the faucet or handles. Ideal for any bathroom sink. Fits all standard US plumbing. Uses 4AA Alkaline Batteries (not included). Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi.
Commercial Chrome Automatic Touchless Sensor Faucet Specifications:
- Motion detection provides touchless operation.
- Sensitive Sensor with Infrared AI Smart-Chip.
- Factory set to 30-second Auto Shutoff (can be adjusted).
- Water Pressure: 0.5 - 7.0 KGS/cm, 10 - 125 psi
- Easy to Install - Instructions Included
- Water-resistant solenoid enclosure
- Advanced energy-saving design for long-lasting battery life
- Sensor faucet comes complete with Hoses & Accessories
- Power Supply: AC110V And DC6V (batteries not included)
- AC/DC power option.
- Ideal for commercial use applications.
- ADA Complaint
- Can be installed easily in any commercial bathroom space.
- Durable Vandal-Resistant Brass Body; Ideal for commercial high use applications
- Adjustable sensing range; while the factory range is set about 4" to 5" from the sensor, it can be adjusted.
- Flashing light indicator; a diagnostic indicator for power up, low battery, and solenoid function.
- The meaning of the codes is described in the installation instructions.
- Convenient
to maintain; with a built-in strainer to prevent sundries from entering
the solenoid valve and the strainer is easy to clean.
- Batteries life is 8,000 cycles per month and with enough water pressure is the approx 5-year service life of the batteries.
- Usage: Commercial
- Ideal for commercial use applications in public restrooms, restaurants, office buildings, and public facilities. Fits all standard US plumbing.
|
|
|
Diameter of the inlet pipe
|
DN15
|
|
Diameter of the outlet pipe
|
DN15
|
|
Water Pressure
|
0.05Mpa - 0.7Mpa
|
|
Power and Voltage
|
DC.6V
|
|
AC.220V - 50/60Hz
|
|
Power Consumption
|
0.5MW
|
|
<2W
|
|
Detection Zone
|
Factory set 25cm/10" (based on standard inductive board)
|
|
Ambient Temperature
|
1 - 45 ℃ / 33.8 -113 °F
|
|
Degree of protection by enclosure
|
1P56
|
|
|
|
 |
|
 |
|
