How to install Fontana Bathroom Shower Valve Large Water Flow Shower Accessories 5 Ways Thermostatic Brass Diverter Faucet Tap Shower Controller | FS-1179
Easy step by step Installation Instructions for Shower Mixer Thermostatic Valve
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.
- Release Six handwheel levers according to the above directions. - Take apart the embed valve, panel, and handwheel. - Dig the embed space for the pipe on the wall according to the specification of the valve. - Dig 4 holes according to the position of the screws. - Use a hammer to thwack the screws into 4 holes. - Fix the valve body with 4 screws. - Find out the expansion screw heads with washer and spring washer. Use copper sleeve wrench to lock the screw heads with the embed valve body. - After connecting all the pipes and before sealing the wall with concrete, confirm no leaking problem occur when you turn on the water. - Fix the decorative panel on the embedded valve body. - Screw the handwheel arms with the handwheels.
Fontana Bathroom Shower Valve Large Water Flow Shower Accessories 5 Ways Thermostatic Brass Diverter Faucet Tap Shower Controller