Installation Instructions for Fontana Perlude Stainless Steel Chrome Finish Shower Set
Installation Instructions for Fontana Perlude Stainless Steel Chrome Finish Shower Set
Fontana Perlude Stainless Steel Chrome Finish Shower SetFontana Perlude Stainless Steel Chrome Finish Shower Set lets you enjoy a wonderful rainfall at home with its square ceiling mount rainfall showerhead. The beautiful rainfall showerhead is giving you a bath under the steady stream of water flow. This sleek and versatile shower system provides shower head size options as well as optional LED lighting. Built-in hydro-powered device powers the LED lights, which provides you with a visual shower temperature. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately. In addition, the control features also allows you to switch between showerhead and faucet. If you are looking for a showerhead with several excellent features rolled into one, then this FontanaShowers is the best option worth considering.
Fontana Perlude Stainless Steel Chrome Finish Shower Set Features:| Brand Name: FontanaShowersModel Number: FS1061SHType: Bath Shower Faucet SetCold/Hot Water Control Type: Single Holder Dual Control Number of Handles: Dual HandleValve Core Material: CeramicType: Fixed Rotatable TypeSurface Material: Stainless SteelFinish: ChromeStyle: ContemporaryInstallation Type: Wall or Ceiling MountShower Head Size: 8", 10", 12", 16"Led Option: With LED or without LED | |
FontanaShowers® Product Warranty Information 
- Before you begin, please read the installation instructions below. Observe all local building and safety codes.
- Unpack and inspect the product for any shipping damages. If you find damages, do not install.
- Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
|
Installation
Instructions
|
|
Shower Head Installation Instructions
|
|
|
|
|
|
|
|
Step 1:
|
shower
|
Step 2:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 3:
|
|
Step 4:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 5:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.
2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench.
3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.
4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.
5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.
|
|
|
|
Hand Held Shower Installation Instructions
|
Step 1:
|
|
Step 2:
|
|
|
|
Hand
Held
Shower
|
|
|
|
Fontana Perlude Chrome Shower Installation Resources
Coordinate the Perlude Shower Installation
Plan the stainless-steel shower assembly, concealed plumbing, controls, mounting points and polished-chrome finish protection before final installation.
Installation GuidesShower HeadMixerComponentsProject FilesChrome Care
Fontana Perlude Installation Questions
What should be completed before fitting exposed components?Complete pressure testing, flushing, waterproofing and mounting verification before unpacking the finished shower components. Review Shower Installation Details How should stainless-steel and chrome surfaces be protected?Use protected tools and nonabrasive materials, and prevent grout, acids and construction chemicals from contacting the finished surfaces. Open Finish-Care Guidance What should final commissioning include?Verify outlet operation, water coverage, control movement, temperature stability, drainage and leak-free connections. Review Rain-Shower Requirements Where can related installation guides be found?Use the central hub for related shower-head, mixer, valve and component-installation resources. All FontanaShowers Installation Guides
|
|
|
