Installation Instruction Fontana Genoa White Gold Bathroom Sink Faucet

Step by step Installation Instruction For Fontana Genoa White Gold Bathroom Sink Faucet Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

faucet

Shower Head Installation Instructions

	Step 1:	shower	Step 2:
	Draw the holes on the ceiling according to the Decorative Cover and pipes.		Drill the holes on the ceiling according to the hole specification and install 4 pipes.
	Step 3:		Step 4:
	Put the screw bolts through the hole on the side to lock pipes.		Install the four-pipes on the showerhead.
	Step 5:		Step 6:
	Step 7:		Step 8:

Before installing, take out four screws from the plate of shower head, separate shower cover from showerhead. 1. Mark the fixing positions and drill holes to suit the anchors. 2. Install the anchors and fix the mounting bar to the ceiling with screws. 3. Screw the shower bars into the shower head tightly. 4. Attach the shower bar to the mounting bar and fix screws and nuts to lock shower bar with the mounting bar at the desired height. 5. Add screen washers. Screw shower hose to the water inlet on the showerhead and then to the water outlet in the ceiling. 6. Respectively hang the end of four "S" shaped bars to be on the holder, the other end is hung to be one of the four rings on the back of shower head, then using the one of the ends of three flexible braided hoses is connected with the water inlet pipe, the other end is connected with the joint of the shower head, then to open the valve switch to test water. 7. Remove "S" shaped bars, close shower head to cover, rotary screws to fix shower head to be on cover.

Additional Information

Shower Dimensions
	shower

Note: Pair this shower head with any Shower Mixer of your choice.