Fontana Mugla 22" LED Thermostatic Waterfall Rain Shower Head with Massage Body Sprays and Hand Shower
Beautifully constructed of solid brass with a chrome finish. This generously sized waterfall/rainfall shower head that will provide relaxation beyond your imagination. The additional massage jets and handheld shower will help target your muscles and maximize your bathing experience. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately.
Fontana Mugla 22" LED Thermostatic Waterfall Rain Shower Head with Massage Body Sprays and Hand Shower Features:
Brand Name: FontanaShowers
Model Number: FS-5925
Finish: Chrome
Installation Type: Wall Mount
Material: Solid Brass
Feature: Thermostatic Shower, LED Shower Head
Shower Head Size: 21.6"x 9" (55cm x 23cm)
Body-Jet Size: 1.9" diameter (5cm)
Thermostatic Control Valve: Three handle control four-way
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
Shower Head Installation Instructions
Step 1:
Step 2:
shower
Open the top cover and drill according to the marked position. 1. Mark by the position of the four holes. 2. Take care to avoid wires and pipes to prevent damage. 3. Be sure to confirm that the four holes are on the same horizontal line.
Remove the protective cover (F). Mark the positions and drill holes to suit the anchors (A). Install the anchors (A) and fix the rough-in valve (B) into the wall with screws. Use a level to ensure that the rough-in valve (B) is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body).
Shower Head Installation Instructions
Step 3:
Step 4:
Wrap Teflon tape around the pipe threads and connect water supply lines and in-wall pipes (not included) as desired to the rough-in valve (B). Turn on the water supply and open the cartridge to check for leakage. Then put on the protective cover and finish the wall surrounding the valve. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed).
Two inlet fittings are connected to the pipe joint of the wall; then the nut, expansion screw, and inlet pipe are connected.
Shower Head Installation Instructions
Step 5:
Step 6:
Reinstall the top cover.
Fix the escutcheon (D) to the showerhead (E) with screws (C).
Shower Head Installation Instructions
Step 7:
Remove the protective cover when the finished wall is completed. Then, install the showerhead (E) and press it against the finished wall.
Shower Head Installation Instructions
Shower Head Installation Instructions
Hand Held Shower Installation Instructions
Step 1:
Step 2:
Hand
Held
Shower
Hand Held Shower
Handheld Shower
Step 3:
Handheld Shower
Shower Body Jets Installation Instructions
Body Sprays Installation Instructions
Step 1:
Step 2:
Body
Sprays
Set the decorative cover on the body jet.
Roll the raw material belt in the thread screws.
Body Sprays Installation Instructions
Step 3:
Use a wrench to tighten 6 body jets on the water outlet holes.
Tighten it in a clockwise direction.
Please screw the handles out according to the above direction.
Take board and four handles out of the faucet body.
Shower Valve Mixer Installation Instructions
Step 5:
Step 6:
According to the actual size, get all pipe embedded mounts well ready.
According to the product basic size, dig four holes on the ideal place of the wall.
Shower Valve Mixer Installation Instructions
Step 7:
Step 8:
Place 4 tapping screws into the holes using a hammer.
Fix the faucet body by hand. And then take it into the four tapping screws.
Shower Valve Mixer Installation Instructions
Step 9:
Step 10:
Connect hot & cold supply water pipes (not provided) and other water pipes. After that, open the water to test if all pipes have leakage or not. At last, seal the wall.
Take the board onto the faucet body.
Shower Valve Mixer Installation Instructions
Step 11:
Step 12:
Screws the handles into the handwheels.
a. Each water function handwheel
b. Tempering handwheel
How to install the Shower Set with Wall Mount Showerhead, Body Jets, Hand Held Shower and Shower Mixer