FontanaShowers® Commercial · Architect & Specifier Guide
Commercial Restroom Fixture Selection & Touchless Handwashing Design
Plan coordinated commercial restrooms by fixture type, mounting configuration, user volume, soap-delivery strategy, sensing and power requirements, accessibility, finish, and project documentation. Use this guide to move from early design decisions to product selection and submittal-ready resources.
Start with the project decision
01 · MOUNTINGDeck or WallCoordinate the fixture with the basin, counter, backsplash, rough-in and service access.
02 · SYSTEMWater + SoapSelect a faucet, a coordinated faucet-and-soap set, or a complete wash station.
03 · SOAP SUPPLYIndividual or MultiFeedMatch reservoir architecture and refill strategy to station count and traffic.
04 · PERFORMANCESensor, Flow & PowerDefine activation, water delivery, electrical coordination and maintainability.
05 · LAYOUTBasin CoordinationCheck spout reach, landing zones, splash control, station spacing and clearances.
06 · ACCESSADA PlanningCoordinate reachable operable parts, clear floor space and under-counter equipment.
07 · APPLICATIONSelect by FacilityMatch durability, capacity and service strategy to the building and traffic pattern.
08 · DOCUMENTSSpecify the SystemConfirm BIM, drawings, product data, installation, maintenance and warranty files.
|
|
Commercial Restroom Selection Framework
Select the Restroom as a Coordinated System
A successful commercial restroom begins with the room, user volume and operating plan—not with an isolated fixture. Coordinate the lavatory, faucet, soap delivery, flushing fixtures, power, accessibility, finish and maintenance access before approving individual products.
| Design Decision | Primary Options | What the Project Team Should Confirm |
|---|
| Lavatory arrangement | Individual basins, repeated stations or shared trough | User volume, station count, splash control, privacy, accessibility and cleaning access. |
| Faucet mounting | Deck mount or wall mount | Basin geometry, backsplash, counter openings, rough-in depth and service approach. |
| Handwashing configuration | Faucet only, coordinated faucet + soap, or integrated wash station | Visual consistency, sensing zones, landing points, power and maintenance responsibility. |
| Soap architecture | Individual reservoir or centralized MultiFeed | Number of dispensers, traffic, dose, refill interval, tank location and tubing access. |
| Controls | Battery, AC/DC, transformer or project-compatible hybrid | Electrical scope, backup strategy, access to components and commissioning. |
| Documentation | BIM, CAD, cut sheet, installation, O&M and warranty | Required project deliverables, exact model data and approved-equal review criteria. |
Mounting & Architecture
Choose Deck Mount or Wall Mount
Deck MountDirect countertop coordinationDeck-mounted fixtures suit many new and retrofit counters. Confirm the mounting hole, counter thickness, spout reach, drain relationship and space for valves, transformers, reservoirs and traps below. Explore Touchless Faucets →
Wall MountClear deck and architectural continuityWall-mounted fixtures can free counter space and simplify surface cleaning, but require early coordination of in-wall depth, structure, supply location, access panels and the relationship between outlet and basin. Compare Sensor Faucets →
Coordinated Handwashing
Specify Water and Soap Together
Coordinating the faucet and dispenser early helps align mounting, reach, activation zones, finish and maintenance access. The visible fixtures should read as one architectural family while the concealed components remain accessible to facility teams.
- Match deck-mount with deck-mount or wall-mount with wall-mount where the design requires a unified expression.
- Confirm that water and soap land comfortably inside the basin without excessive reach or splash.
- Coordinate electrical components, reservoirs, tubing, supply lines and drains below the counter.
- Use a repeatable kit of parts across multi-restroom and portfolio projects.
Soap Delivery Strategy
Individual Reservoir or Centralized MultiFeed
Individual SupplyIndependent service at each stationAppropriate where station counts are limited or independent replacement is preferred. Confirm usable capacity, refill method, soap compatibility, dose and cabinet access.
MultiFeed SupplyCentral service for repeated stationsConsider centralized soap delivery where multiple dispensers and high usage make individual refilling inefficient. Define tank capacity, supported head count, pump and manifold arrangement, tubing routes, priming and service access.
Selection principle: reservoir size alone does not determine the right system. Base the decision on station count, activations, dose, refill objective, reserve capacity and available service space.
Basin & Multi-Station Coordination Make the Fixture, Basin and User Zone Work Together
Spout relationshipCoordinate reach and outlet position with the basin so water lands within the usable bowl rather than at the rim, drain hardware or counter.
Soap relationshipPlace the dispenser within comfortable reach while keeping its sensing and soap landing zone distinct from the faucet activation zone.
Concealed servicesReserve space around the trap, water controls, electrical components and soap equipment without compromising accessibility or future maintenance.
Accessibility Coordination Integrate Accessible Use into the Selection
Touch-free operation can simplify use, but accessibility depends on the complete installed arrangement. Coordinate clear floor space, knee and toe clearance, counter and lavatory geometry, reachable dispenser placement, plumbing protection and concealed equipment. Confirm the applicable code, adopted edition and project interpretation with the design professional and authority having jurisdiction.
Project Applications Adjust the Selection to the Facility
Airports & TransitPrioritize uptime, high-capacity servicing, durable components, redundancy and fast maintenance across large restroom fleets.
Stadiums & VenuesPlan for compressed peak demand, rapid pre-event service, vandal resistance and repeated multi-station layouts.
HealthcareCoordinate hand-hygiene workflow, appropriate outlets, cleaning protocols, reliable soap availability and maintainable systems.
EducationBalance durability, water control, accessible use, standardized parts and straightforward facility maintenance.
HospitalityCombine architectural finish continuity and discreet service infrastructure with dependable guest operation.
Offices & Public BuildingsBalance lifecycle cost, water efficiency, visual consistency and repeatable specifications across floors or sites.
Complete Restroom Scope Coordinate Flushing Fixtures and Sanitaryware
Automatic Flush ValvesConfirm toilet or urinal application, exposed or concealed configuration, rough-in, flush volume, power, override and service access. Explore Auto Flush →
UrinalsCoordinate fixture material, inlet and waste arrangement, flush compatibility, partition clearances, accessibility and cleaning requirements. Explore Urinals →
ToiletsConfirm floor- or wall-mounted construction, carrier requirements, discharge location, flush system, clearances and maintenance strategy. Explore Toilets →
Product Pathways Explore Commercial Restroom Categories
Move from the design criteria above to the appropriate FontanaShowers product family. Confirm the current cut sheet, configuration and project requirements for the exact model selected.
Water DeliveryTouchless FaucetsCompare commercial sensor faucets by mounting, sensing, power, flow, finish and project application. Explore Faucets →
Coordinated SystemsFaucet + Soap SetsSelect visually coordinated water and soap fixtures for deck-mounted or wall-mounted wash stations. Explore Sets →
Soap DeliveryAutomatic DispensersExplore deck-mount, wall-mount and project-oriented automatic soap-dispenser configurations. Explore Soap →
Flushing SystemsAutomatic Flush ValvesReview exposed and concealed touch-free flushing solutions for commercial toilets and urinals. Explore Flush →
SanitarywareCommercial UrinalsCoordinate fixture material, inlet, waste, flushing, clearances, accessibility and cleaning requirements. Explore Urinals →
Fixture FinishFinish SelectionCoordinate faucets, dispensers, flushing fixtures and architectural hardware across the restroom program. Explore Finishes →
BIM, Specifications & Submittals Complete the Selection with Project Documentation
Before approval, confirm that the exact selected model provides the information needed for architectural, plumbing, electrical, contractor and facility coordination.
Design Coordination- BIM/Revit family where required
- Dimensioned technical drawing
- Mounting and rough-in information
- Finish and model identification
Submittal Review- Product data and performance
- Power and connection requirements
- Soap compatibility and capacity
- Code and certification information
Installation & Handover- Installation instructions
- Commissioning procedure
- Maintenance and troubleshooting
- Warranty and replacement parts
Technical References Codes, Accessibility and Water-Efficiency Resources
Accessibility & Codes
Water, Buildings & Hygiene
Project requirements vary by jurisdiction, building type and adopted code edition. Confirm final fixture counts, accessibility, water use, certifications and installation requirements with the project architect, plumbing engineer, specification consultant and authority having jurisdiction.
|
|
|
