Home > How to Install the Fontana Sagua Brushed Nickel Wall Mount LED Shower Set?

Fontana Sagua Brushed Nickel Wall Mount LED Shower Set

With our Sagua shower head you can enjoy the pleasure of a rainfall shower even in small shower enclosures. Installation is very easy, it is wall mount and it can easily replace an existing shower head. It comes with a complimentary hand held shower and a thermostatic valve to ensure you have the best possible shower experience. You can choose the shower head size - 10" or 12". The LED lights with create a warm glowing atmosphere and in the same time they will give you an indication of the water temperature, as they change colors accordingly. No electrical connection is necessary, they are powered by the water flow. Only the best materials have been used – the valve comes with ceramic core material for a long lasting life time. It comes complete with accessories and installation instructions.

Fontana Sagua Brushed Nickel Wall Mount LED Shower Set Features:

  • Brand Name: FontanaShowers
  • Model Number: FS133SWM-N
  • Type : Shower Set
  • Cold / Hot Water Control Type: Self-control thermostat
  • Size: 7.9x11.8 inch (20.1-30) cm
  • Style: Contemporary
  • Number of Handle: Dual Handles
  • Finish: Brushed Nickel
  • Exposed Shower Faucet Feature: without straight guide
  • Type: Fixed rotatable type
  • Valve Core Material: Ceramic
  • Surface Finish: Brass
  • Shower Faucet Type: Exposed Shower Faucets
  • Feature: Thermostatic Faucets, LED light
  • Installation Type: Wall Mount
  • Size: 10 inch
  • Water Pressure: 0.1-0.5Mpa
  • LED Power: Water Flow
  • LED Color: Water Temperature
    		•  Fontana Sagua Brushed Nickel Wall Mount LED Shower Set
    FontanaShowers®Product Warranty InformationFontanaShowers Product Warranty
    • Before You Begin, Please Read The Installation Instructions Below. Observe All Local Building And Safety Codes.
    • Unpack And Inspect The Product For Any Shipping Damages. If You Find Damages, Do Not Install.
    • Please Note All Showers Must Be Installed By A Professional And Certified Plumber Otherwise Warranty Might Be Voided.

    		 shower

    Shower Head Installation Instructions

    Step 1: shower Step 2:



    Step 3: Step 4:



    Step 5:




    1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.

    2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench.

    3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.

    4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.

    5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.


    Hand Held Shower Installation Instructions

    Step 1: Step 2:
    Hand
    Held
    Shower





    Step 3:



    Hand Shower Outlet Installation
    • Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow.

    Note:
    This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting.

    • Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint.

    Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation.




    Thermostatic Mixer Installation Instructions


    Step 1: Step 2:
    Mixer Valve


    Mixer Control Valve Installation Instructions
    Step 3: Step 4:



    Mixer Control Valve Installation Instruction
    Step 5: Step 6:




    How To Install The Shower Set With Showerhead, Hand Shower, And Shower Mixer
    Fontana Sagua LED Shower Installation Resources
    Install the Sagua Brushed-Nickel LED Shower
    Plan the wall-mounted head, concealed mixer, LED operation, water delivery and brushed-nickel finish protection.
    Installation Guides
    All FontanaShowers Installation Guides Shower Installation Details
    LED Shower
    Rain-Shower Requirements Wall Rough-In Dimensions
    Mixer Installation
    Shower Mixer Installations Thermostatic Valve Rough-In
    Components
    Handheld Installation Body-Jet Installation
    Technical Files
    BIM / Revit Library Architect Installation Resources
    Project Support
    Installation & Maintenance Compliance Records
    ALL FONTANASHOWERS INSTALLATION GUIDES →

    Sagua LED Shower Installation Questions

    When should the LED function be tested?

    Test it before final enclosure and again during commissioning. Follow the model instructions for any controller, transformer or water-powered LED components.

    What support is required for the wall-mounted head?

    Provide rigid structural backing for the shower arm or mounting assembly so the finished wall does not carry the fixture load.

    How should the brushed-nickel surface be protected?

    Use clean gloves, protected tools and a soft cloth. Avoid abrasive cleaners that could alter the directional appearance of the finish.

    What should final commissioning cover?

    Verify leak-free connections, uniform spray, proper control operation, stable temperature and consistent LED response under normal flow.

    Brushed-nickel wall-mounted LED rainfall shower installation planning

    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions