The FontanaAquaVector™ Gold Wall-Mounted Sensor Faucet is elegance bestowed upon technology in service to convenience. As a sun-kissed gold fixture, the faucet is a beacon of luxury that can grace any remaining space in an upscale washroom. Made from fine brass, the faucet can endure wear and protect against wear for long years of dependable use. The touch-free activation of this system reduces contact, limiting the possibilities of contamination for healthier surroundings.
It is stunning in its gallery-worthy modern silhouette that exudes slinky urban elegance into interior spaces, assisting in commercial-residential speculations alike. The single-hole wall-mount design saves on space and can fit into different arrangements. It comes with a standard G1/2" connection, allowing for easy compatibility, with the pressure rating from 1–6 bar not affecting performance. Apart from its magnificent look, it works toward conserving water use through efficient flow control. This model is the absolute emblem of a meeting point between art, technology, and utility in hotel, office, restaurant, and home-based premises-meaning creating solutions that are hygienic, effective, and stylish for the top-class restroom.
FontanaAquaVector™ Gold Wall-Mounted Sensor Faucet FAQ
Wall Rough-In Alignment, Dynamic Pressure Stability; Gold Surface Protection
The FontanaAquaVector™ Gold automatic faucet combines solid-brass construction, single-hole wall mounting, touch-free motion-sensor activation, a standard G1/2-inch inlet connection, and reliable operation across a 1–6 bar water-pressure range.
How should the concealed wall connection be aligned before installing the faucet?
Set the G1/2-inch rough-in level, square to the finished wall, and firmly secured to structural support. Coordinate the spout centerline with the basin drain so the stream lands within the intended washing area without striking the rear basin wall or causing excessive countertop splash.
How should the motion-sensor detection zone be commissioned after installation?
Complete sensor testing after the basin, mirror, backsplash, soap dispenser, lighting, and nearby accessories are installed. Confirm that normal hand placement activates water promptly without detecting reflective surfaces, passing movement, cleaning equipment, or objects outside the intended washing zone.
What should be checked if flow becomes weak or shutoff is delayed?
Flush the supply branch before connection, inspect the inlet passage for construction debris, and verify dynamic pressure within the specified 1–6 bar range. Also clean the sensor window and confirm that sediment is not restricting the internal valve or preventing complete closure after hand removal.
How should the Gold finish be cleaned without scratching or dulling its surface?
Remove fingerprints, water spots, and soap residue with a soft damp microfiber cloth, then dry the faucet immediately. Use diluted pH-neutral soap only and avoid abrasive pads, acidic descalers, bleach, ammonia, steel wool, polishing powders, metal polish, and concentrated disinfectants.
Gold Auto 
