Home > How to Install Fontana Oil Rubbed Bronze Shower System With Shower Head And Hand Shower

How to install Fontana Oil Rubbed Bronze Shower System With Shower Head And Hand Shower | OIL-RUBBED-BRONZE-6107DORB

Fontana Oil Rubbed Bronze Shower System With Shower Head And Hand Shower

Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

shower

Wall Mount Shower Head Installation Instructions


Step 1:	shower	Step 2:



Step 3:		Step 4:



Step 5:		Step 6:
No tools required, ½ connector fits standard-sized shower plumbing.

1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon. 2. Insert the new arm into the fitting in the wall and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench. 3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish. 4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary. 5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.

Ceiling Mount Shower Head Installation Instructions


	Step 1:		Step 2:

Fontana Bronze Shower System Installation

Coordinate the Showerhead and Hand Shower

Explore related guidance for wall mounting, concealed mixer connections, handheld placement and complete system testing.

Installation Hub

Showerhead

Mixer

Hand Shower

Technical Files

Project Resources

VIEW ALL INSTALLATION GUIDES →

Bronze Shower System Installation Questions

What should be coordinated before rough-in?

Confirm the mixer depth, shower-arm position, handheld outlet, holder elevation and water-supply routing using the exact system drawing. Open Product Guide

Where should the handheld holder be mounted?

Position it for comfortable reach without allowing the hose to interfere with controls or rest on the shower floor. View Handheld Guidance

How should the bronze finish be protected?

Install finished trim after dusty construction, protect it from tools and use only cleaning methods approved for the finish. Review Maintenance Guidance

Where is the complete installation library?

The installation hub connects this shower system with mixer, showerhead, handheld and rough-in resources. Open Installation Hub