Refined aesthetics and precise sensor-driven performance define the Fontana Solo™ Edition – Champagne Hands Free Wall Mounted Faucet, made for commercial washroom environments that need dependable hygiene management, durability, and a modern look. The champagne surface gives off a warm metallic vibe that lifts the whole interior design, plus it resists corrosion, fingerprints moisture exposure and the usual daily scuffing.
It’s built for wall-mounted single hole installation, so it keeps a neat architectural footprint and helps you save basin space, also it makes maintenance easier in busy, high traffic areas. There’s an integrated motion sensor system with a factory set 25 cm detection zone, and a fast 0.5 second response time… so the touchless start stays accurate and responsive, helping improve sanitation and cut down cross contamination. It works with a water pressure range of 0.05–0.7 MPa, and it keeps stable operation up to 0.6 MPa, giving steady flow that fits continuous commercial usage. Power comes from DC 6V with 4 AA battery support, which helps keep it running reliably even when installation conditions are a bit different, while also keeping energy consumption low. It has IP56 rating, which is resistent to moisture and external elements, making it last longer in those tough bathroom environment. The connection suitability and compatibility, make for easy installation with standard plumbing infrastructure, you get 60 seconds of operational time, and the proper sensing distance helps ensure effective water use. Overall, the Solo™ Edition, with its champagne coating, mixes fast responding infrared sensor, a dependable build, and a metal like look into a sort of innovative solution meant for improving hygiene results.
FONTANA SOLO™ EDITION
Fontana Solo Touchless Faucet FAQs
Commercial wall-mounted infrared touchless faucet with
DN15 plumbing connections, automatic motion activation,
DC 6V battery power, IP56 protection, factory-set sensing,
and commercial-grade hands-free operation.
✥ Sensor Commissioning Procedure? +
Complete sensor commissioning after the basin,
finished wall, backsplash, mirror, lighting, and surrounding
accessories are fully installed. The factory sensing distance
is approximately 25 cm or 10 inches. Verify dependable
hand detection without unintended activation from nearby
reflective surfaces.
◇ Hydraulic Checks During Installation? +
Flush the DN15 supply piping before final connection,
verify all plumbing fittings are secure, inspect the internal
water path and filter for construction debris, and confirm
stable dynamic pressure before commissioning the sensor
and valve assembly.
◯ Operating Water Pressure? +
The Solo Edition is specified for approximately
0.05–0.7 MPa supply pressure, with an operational range
of approximately 0.05–0.6 MPa. Maintain stable dynamic
pressure and provide regulation where required.
↻ Continuous Water Flow Diagnostics? +
Clean the infrared sensor window and remove
stationary or reflective objects from the detection field.
Verify stable electrical power and inspect the automatic
valve and water path for sediment or incomplete closure
if water continues after hands leave the sensing zone.
⌁ Automatic 60-Second Timeout? +
The Solo control system automatically terminates
continuous operation after approximately 60 seconds.
During commissioning, verify the timeout operates correctly
and that normal sensor function resumes once the sensing
field has cleared.
⌂ Wall-Mount Basin Coordination? +
The faucet measures approximately 7.87 inches
high with a 4.13-inch spout length. Coordinate the wall
outlet position with basin geometry, drain placement,
splash-control requirements, and comfortable hand clearance
before completing the finished wall.
⚡ DC Power and Battery Requirements? +
The Solo operates at DC 6V using four AA-size
batteries. Maintain dry and accessible service space for
future battery replacement, verify the low-battery indicator
functions correctly, and protect electronic components
from moisture.
⌕ Routine Commercial Maintenance? +
Periodically clean the infrared sensor and faucet
outlet, inspect the built-in filtration and water connections,
remove mineral deposits, and verify dependable automatic
shutoff. Clean decorative surfaces with a soft cloth and
mild non-abrasive cleaner.
Champagne
♧
25 cm Sensor Factory Detection
⌁
Infrared Sensor Hands-Free Operation
⚙
DC 6V 4 AA Battery Power
◇
IP56 Commercial Protection
