Home > Install Fontana Sierra Round Ceiling Shower Set? | FontanaShowers

Fontana Sierra Round Ceiling Mount Ultra thin Bathroom Shower Head Set

This Fontana concealed thermostatic mixer valve shower set is a perfect addition to any bathroom. The thermostatic mixer valve gives you complete temperature control with a built-in anti-scalding device, so you'll never have to worry about a drop in temperature again. Chrome plated solid brass construction Built-in anti-scald device set to 100.4°F (38° Celcius). Easy clean anti-limescale rubber jets Minimum wall depth of 3.42" (87mm) required Minimum 1.0 bar water pressure.

Fontana Sierra Round Ceiling Mount Ultra thin Bathroom Shower Head Set Features:

  • Brand Name: FontanaShowers
  • Model Number: FS3361BS
  • Type: Bath & Shower Set
  • Style: Contemporary
  • Number of Handle: Dual Handle
  • Type: Fixed Rotatable Type
  • Surface Finish: Chrome
  • Feature: Thermostatic Faucets
  • Cold/Hot Water Control Type: Dual Holder Dual Control
  • Size: 8", 10", 12", 16", 20", 24"
  • Surface Treatment: Polished
  • Valve Core Material: Ceramic
  • Installation Type: Wall Mount
  • Fontana Sierra Round Ceiling Mount Ultra thin Bathroom Shower Head Set
    FontanaShowers® Product Warranty Information FontanaShowers Product Warranty
    • Before you begin, please read the installation instructions below. Observe all local building and safety codes.
    • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
    • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided


    Shower Head Installation Instructions



    1. Ceiling arm mounting plate
    2. Olive
    3. Locking nut
    4. Ceiling trim
    5. Ceiling arm
    6. Emily fixed showerhead
    7. Fixing screws and wall plugs (not shown)
    shower
    Step 1

    Step 2

    Step 3

    Step 4


    Step 5


    Step 6


    1. Open the closed cover of the shower holder and take out the screws.

    2. Drill two holes size 6mm on the wall according to the hole position of the shower holder. Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.

    3. Connect the shower hose with the water outlet connection part and hand shower. Plug the hand shower in the shower holder.

    Fontana Sierra Ceiling Shower Resources
    Install the Sierra Round Ceiling Shower
    Coordinate the circular shower-head centerline, overhead support, supply connection and finished-ceiling detail.

    Sierra Ceiling Shower Installation Questions

    How should the round shower head be centered?

    Establish its centerline relative to the showering area, enclosure, drain and other fixtures before locating the overhead connection.

    What must carry the shower-head weight?

    Suitable structural framing must support the complete assembly; ceiling board or decorative finish should not carry the load.

    When should the overhead connection be tested?

    Pressure-test and inspect it before ceiling closure, then verify the connection again under normal operating flow.

    Where can ceiling mounting requirements be reviewed?

    Use the dedicated ceiling installation detail alongside the Sierra model drawing. Open Ceiling Details

    Round ceiling-mounted rainfall shower installation and overhead support planning


    The installation and illustrations provided are for informational purposes only.

    For detailed and accurate installation instructions, please refer to the

    product specifications or the corresponding BIM file.


    Luxury Showers

    Experience unparalleled luxury and rejuvenation with our designer shower.

    Luxury Bathroom Faucet

    Advanced technology with customizable water pressure and temperature.

    Unique Designs Showers

    Revitalize with our opulent showers for ultimate indulgence.