Fontana Alba Adriatica Antique Bronze Touchless Faucet FAQ
Widespread Alignment, Sensor Shutoff Stability; Antique Bronze Finish Protection
The Fontana Alba Adriatica Antique Bronze touchless faucet combines solid-brass construction, hot-and-cold water control, an 8-inch widespread deck-mounted layout, infrared activation, 360-degree spout rotation, and an 8.27-inch contemporary faucet profile.
How should the faucet body and remote sensor control be aligned across the 8-inch layout?
Mark both deck openings from the installation drawing before drilling and confirm that the spout outlet aligns with the basin drain. The separate sensor control should remain accessible without being positioned where normal countertop movement or reflective objects can cause unintended activation.
What should be checked if the faucet continues running after hands leave the sensing area?
Clean the sensor window, remove reflective objects from the detection field, verify stable electrical power, and inspect the internal valve for construction debris. Repeated delayed shutoff can also result from incorrect sensor positioning or contamination preventing the valve from seating completely.
How should the 360-degree rotating spout be commissioned without loosening the deck connection?
Secure the mounting hardware evenly beneath the countertop and rotate the spout through its intended operating range while checking the base for movement. Do not use the spout as leverage during tightening, because excessive rotational force can disturb the mounting seal or supply connections.
How should the Antique Bronze finish be cleaned without removing its aged coloration?
Wipe the faucet with a soft damp microfiber cloth and dry it immediately after cleaning. Use diluted pH-neutral soap only and avoid abrasive pads, acidic descalers, bleach, ammonia, metal polish, steel wool, and aggressive scrubbing that may brighten or unevenly alter the antique surface.
Antique Build 
