How to install Amasra Antique Brass Kitchen Sink Faucet With Hot And Cold Mixer | FS293BFC
Easy step by steps Installation Instructions for Kitchen Sink Faucet With Hot And Cold Mixer
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
faucet
Kitchen Faucet Installations Instructions
Step 1:
Step 2:
faucet
kitchen faucet
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
(Correct way for Hose)
Turn on hot and cold water supplies and flush water lines into a container for one minute. Important: This flushes away any debris that could cause damage to internal parts.
1. Remove the mounting nut, metal washer, and rubber washer from the threaded pipe. 2. Fit the O-ring into the groove of the faucet body. Screw waterlines into the corresponding screw-hole of the faucet body. 3. Insert waterlines and threaded pipe into the hole of the sink. 4. Install rubber washer, metal washer, and mounting nut back to the threaded pipe. Adjust the faucet body correctly and secure with mounting screws tightly. 5. Connect waterlines to angle stops. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON). 6. Turn faucet on for 1 minute to flush any debris.
Flexible Hose Connecting Hose Care must be taken when connecting the flexible connection hose from the power supply box to the spout to ensure it does not bend sharply and kink or twist. See above for recommended ways to fit the flexible connecting hose.
Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connection hose.
Amasra Antique Brass Kitchen Sink Faucet With Hot And Cold Mixer
It is a beautiful kitchen faucet from our antique range. It features a unique design: it is a tall faucet (9.4") and the spout and handle come in a specific style, with an antique surface treatment. It is deck mount, single hole, with one handle and hot and cold water mixer for your convenience. This kitchen faucet is built with the best materials – the body, handle and spout are made of brass and the valve core is ceramic, for best performance and long lasting life time. It comes with complete accessories and installation instructions. The drain must be purchased separately.
