If you are looking for a simple yet fully functional shower set, then this Fontana Lenox 2-Way Function Valve Shower Set is the one for you. Designed with a minimalistic approach in mind, this shower set incorporates a slim hand shower with 3 functions and round shower head together with a handheld shower that gives good handling and grip even with soapy hands. Turn the valve knob to the left and it will turn on the hand shower. While turning it to the right will give you rainfall feeling with its showerhead. The vibrant chrome finish also adds to the sleekness of the whole shower set, thereby making it suitable for many contemporary bathrooms. All parts are made from high-quality materials to ensure the shower set lasts long and is backed up by a 1-year warranty as a sign of the manufacturer's confidence. With all these features, the Fontana Lenox 2-Way Function Valve Shower Set is definitely worth every penny.
Fontana Lenox 2-Way Function Valve Shower Set Features:
Brand Name: FontanaShowers
Model Number: FS6112SS
Type: Complete Shower Set
Number of Handle: Single Handle
Valve Core Material: Ceramic
Shower Material: Solid Brass
Style: Contemporary
Shower Head Size: 8", 10", 12", 16"
Cold/Hot Water Control Type: Single Holder Dual Control
Type: Fixed Type
Surface Finish: Chrome
Hand Shower Function: Pulsed water, Sprinkle Water, Dense Rain Water
Use your hands counterclockwise to unscrew the old showerhead and removed it.
Take out the showerhead, make sure the shower filter is placed in the connector.
Ensure the showerhead full horizontal alignment wall mounted shower arm thread.
Use your hands clockwise to tighten showerhead.
1. Install the valve body. Wrap the threaded portion of the joints in Teflon tape and connect the water inlet and outlet.
2. Put the protective cover on the valve body and finish the shower wall.
3. When the finished wall is complete, remove the protective cover.
4. Install the escutcheon, and handle. Tighten the set screw with an Allen wrench to secure.
5. Attach the shower arm escutcheon to the shower arm. Wrap the threaded portions of the shower arm with Teflon tape and connect the arm to the shower inlet. Adjust the direction of the water flow as needed. Attach the rainfall shower head to the shower arm.
allation
Hand-Held Shower Instructions
5. Hole Locations For Wall Mount
Remove Front Cover (5A) from Wall Mount (5B). Use Wall Mount Screw Holes (5C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.
7. Wall Mount Installation
Place Wall Mount (7A) into wall and inset Mounting Screws (7B) through Wall Mount Holes (7C) and tighten until Wall Mount (7A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (7D) into Wall Mount (7A).
8. Drop Elbow & Hose Installation
Apply PTFE plumbers tape on both ends of Pipe Nipple (8A) (not included). Screw Pipe Nipple (8A) into the elbow inside the wall. The Pipe Nipple (8A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (8B) onto Pipe Nipple (8A) and tighten until Drop Elbow (8B) is property positioned and flush to the finished wall.
Place Rubber Seal (8C) inside Hex Hose Fitting (8D). Connect Hex Hose Fitting (8D) into Drop Elbow Outlet (8E) by turning Hex Hose Fitting (8D).
9. Unit Start Up Turn on hot and cold water supplies, and check al connections for leaks.
10. Final Flushing
For final flushing, turn valve on and allow water to run through the Hose (10A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.
11. Shower Arm Installation
Place Rubber Seal (11A) inside Tapered Hose Fitting (11B). Conned Hand Shower (11C) to Hose (11D) by turning Tapered Hose Fitting (118) clockwise.
Waring: Make sure Hand Shower (11C) is securely tightened to Hose (11D).
The installations & illustrations for Fontana Lenox 2-Way Function Valve Shower Set are for informational purposes only.