Installation Instructions for Fontana Verona Bathroom Kitchen Sink Faucet
Fontana Verona Gold Waterfall Hot and Cold Water Mixer Bathroom Kitchen Sink Faucet
This Bathroom and kitchen faucet is built with quality material, professional technology and finished with an elegant surface. This sink faucet can stop the water at any time. Save a little water each time. Durable ceramic cartridge offers a gradual and accurate control of the flow and temperature of the water. Easy and straight forward to install, replace and clean. This beautiful elegant faucet design comes with solid construction for long durability that will upgrade your bathroom with a modern and cool look.
Fontana Verona Gold Waterfall Hot and Cold Water Mixer Bathroom Kitchen Sink Faucet Features:
2. Attach the provided braided water lines to the faucet until hand tight.
3. Remove the brass lock nuts from the mounting posts, and attach the threaded mounting posts to the faucet body using a Philips screwdriver. Set the brass lock nuts aside for now
4. Set the faucet into its prepared mounting hole.
5. From below, slide the rubber washer onto the mounting posts followed by the metal washer. Hold in place.
6. Secure the faucet by reattaching the brass lock nuts that were removed in step 3. Hand tightens and adjust the faucet until it is properly aligned. Once aligned, use the provided basin wrench to finish tightening the locknuts.
7. Apply plumber’s tape or thread sealant to the threading on each braided water line. Attach the water lines to your main water supply. Ensure that you are connecting the hot and cold lines accordingly.
8. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath.
9. Check to ensure that both cold and hot water running properly. Allow the water to flow for approximately 60 seconds to remove any dust or sediment within the waterlines.