Home > Installation Instruction for Bravat Chrome Wall Mounted Square Shower Set With Valve Mixer 3-Way Concealed And Six Body Jets

Bravat Chrome Wall Mounted Square Shower Set With Valve Thermostatic Mixer 3-Way Concealed And Six Body Jets


The Bravat Wall Mounted Chrome Shower Set With Valve Mixer 3-Way Concealed is one of the most trendiest finishes across decor styles in the bathroom. It has a contemporary style with a beautiful Chrome finish. When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for.

Bravat Wall Mounted Chrome Shower Valve Mixer 3-Way Concealed Features:

  • Brand Name: FontanaShowers
  • Model Number: FS1110
  • Type: Shower Set & Shower Mixer
  • Style: Contemporary
  • Type: Fixed Support Type
  • Surface Finish: Chrome
  • Installation Type: Wall Mount
  • Number of Jets: Six
  • Control Type: Single Holder Dual Control
  • Size: 7.91"-11.85" (201-300mm)
  • Surface Treatment: Polished
  • Valve Core Material: Ceramic
  • Bath Shower Type: In-Wall Shower Mixer
  • Valve Type: Ceramic Valve
  • Faucet Handle Material: Zinc Alloy
  • Mixer Body Material: Brass
  • Valve Included: Yes
  • Embedment Depth: 2.16" (55mm)
  • Valve Panel Dimension: 6.29"x6.29" (160x160mm)
  • Connector: G1/2"B (Standard)
  • Bravat Chrome Wall Mounted Square Shower Set With Valve Mixer 3-Way Concealed And Six Body Jets
    FontanaShowers®Product Warranty InformationFontanaShowers Product Warranty

    Before you begin, please read the installation instructions below. Observe all local building and safety codes.
    • Unpack and inspect the product for any shipping damages. If you find damages, do not install.
    • Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.





    Shower

    Shower Head Installation Instructions


    shower Shower Head Parts Included:
    • Wall Mounting Arm
    • Locking nut
    • Wall trim
    • Shower arm
    • Showerhead
    • Fixing screws and wall plugs (not shown)

    shower
    Installation

    Step 1: Step 2:
    Step 3: Step 4:
    Step 5: Step 6:

    1. Apply plumber’s tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.

    2. Insert the new arm into the fitting in the wall or ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench.

    3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.

    4. Before securing the decorative escutcheon to the wall, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.

    5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.

    6. Run water to flush out any debris.

    7. Apply plumber's tape to the threads and then install the new showerhead onto the shower arm clockwise.
    shower

    BathSelect Ancient Round Antique Rainfall Wall ShoweBathSelect Ancient Round Antique Rainfall Wall Shower Head Installation Instructions Head Installation Instructions