Fontana Marigold Polished Gold Touchless Faucet FAQ
Infrared Calibration, Solenoid Protection & Tall-Spout Commissioning
This polished gold touchless basin faucet combines infrared hands-free activation,
single-hole deck mounting, hot-and-cold mixing, a ceramic valve core, and a 12.99-inch profile.
How should the infrared detection zone be validated after installation?
Complete sensor testing only after the basin, backsplash, mirror, and accessories are installed. Check several hand-entry angles and verify dependable activation without detecting reflective surfaces, standing water, or nearby fixtures.
How should the supply piping be prepared before connecting the solenoid valve?
Flush the hot and cold branches separately until construction debris is removed, verify correct inlet orientation, clean any supply strainers, and prevent sediment from reaching the ceramic mixer, solenoid diaphragm, or internal waterways.
What should be verified during repeated automatic shutoff testing?
Run multiple consecutive activation cycles and confirm consistent opening and prompt closure without solenoid chatter, delayed shutoff, residual dripping, intermittent discharge, false reactivation, or pressure-related cycling.
How should the 12.99-inch faucet profile be coordinated with the basin?
Center the outlet over the effective drainage zone, verify sufficient clearance above the rim, and test the stream at normal operating pressure to prevent discharge from striking the basin wall and producing excessive splash.
