 |
 |
 |
|
Fontana SafeTouchless Gun Metal Gray Touch Free Faucet
A refined space is built through intentional elements, the Fontana SafeTouchless Series Gun Metal Gray Solid Brass Touch Free Faucet applies its deep gun metal gray color together with its advanced multi-mode sensing system to create an exact performance. The distinctive surface design provides modern industrial strength, which improves high-traffic wash spaces in hospitality venues, healthcare environments, corporate facilities and contemporary commercial interiors. The streamlined deck-mounted design creates a strong visual impact while it works with stone, ceramic and glass basins to keep the countertop system organized. The outlet has an exact design that produces a controlled water stream that delivers water to the sink area without causing splashes during times of high usage. The sensing system combines multiple technologies through infrared, capacitive, microwave and TOF activation methods which provide quick response capabilities under diverse environmental conditions. This provides various customizable operation modes through its adjustable detection distance which enables users to select various operational modes across different environments. The automatic shutoff function controls operation time to stop excessive water waste while it helps achieve conservation objectives. The solid brass construction provides high durability because it creates a strong internal structure which operates reliably through continuous use. The hammer solenoid valve protects the internal parts by keeping them operational and making less operational sound. It maintains regular output because it can handle different pressure levels without any problems. Organizations can operate through three power options which include direct electrical power supply, battery backup and combined power mode. It requires low energy use, which improves its efficiency and extends its operational lifespan in extreme working conditions.
SAFETOUCHLESS™ SERIES
Fontana SafeTouchless Faucet FAQs
Commercial deck-mounted touchless faucet with solid brass
construction, multi-mode sensing technology, anti-water-hammer
solenoid control, adjustable detection range, and flexible
AC/DC power configurations.
✥
Sensor Calibration Procedure?
+
Complete sensor commissioning after the basin, countertop,
backsplash, and adjacent reflective surfaces are installed.
The sensing distance can be adjusted within approximately
10–30 cm using a regular magnet to establish reliable hand
detection for the installed basin geometry.
◇
Which Sensor Technologies Are Supported?
+
The SafeTouchless sensing platform supports infrared, TOF,
capacitive, and microwave sensing technologies. Commissioning
should confirm stable activation within the intended detection
field while preventing unintended response from surrounding
surfaces or fixtures.
◯
Operating Water Pressure?
+
The specified operating water-pressure range is approximately
0.05–0.8 MPa. Verify stable dynamic pressure during commissioning
and regulate excessive supply pressure where required to support
consistent sensor-valve operation and controlled discharge.
↻
How Does the Anti-Water-Hammer Valve Work?
+
The faucet incorporates an anti-water-hammer solenoid valve
designed to reduce hydraulic shock during automatic opening
and closing. During servicing, inspect the valve and inlet
passages for debris that could interfere with complete seating.
⌁
Available Flow Configurations?
+
Published flow configurations include approximately 1, 1.9,
2, 3.8, 4, and 5.7 liters per minute, with project-specific
flow configurations also available. Confirm the specified
outlet configuration during project submittal and commissioning.
⌂
Maximum Water Temperature?
+
The published maximum water temperature is approximately
70°C. Where tempered water is required, coordinate upstream
mixing and temperature-control equipment with applicable
plumbing and accessibility requirements.
⚡
Power Supply Options?
+
The faucet supports 110–240V AC operation, 6V DC using four
1.5V alkaline batteries, or combined AC+DC operation.
Confirm the selected electrical configuration before final
sensor and solenoid commissioning.
⌕
Routine Maintenance Requirements?
+
Periodically clean the sensor window and outlet, inspect inlet
connections and filtration, verify positive solenoid shutoff,
check for mineral accumulation, and confirm consistent
activation throughout the adjusted sensing field.
Gun Metal Gray
♧
10–30 cm
Adjustable Sensing
◇
Solid Brass
Commercial Construction
⌁
Multi-Mode Sensor
Advanced Detection
⚙
Anti-Hammer Valve
Controlled Shutoff
- Brand Name: FontanaShowers®
- Model Number: FS2140GMG
- Finish: Gun Metal Gray
- Type: Touchless Sensor Faucet
- Installation Type: Deck Mounted
- Solenoid valve: Anti-water hammer
- Style: Contemporary
- Material: Solid Brass
- Water Pressure: 0.05 ~0.8 Mpa
- Power Supply: AC:110-240V; DC: 6V(4x1.5V alkaline battery); AC+DC
- Power consuption: Active mode≤2.5W Standby mode≤ 0.5mW
- Battery lifespan: 50000 cycles
- Inlet/outlet: 1/2” , 3/8” , 9/16”
- Water temperature: ≤ 70 ℃
- Flow rate: 1/ 1.9/ 2/ 3.8/ 4/ 5.7L/M, or by customer’s request
- Sensing distance: 10-30 cm (can be adjusted by using a regular magnet)
- Activation: Infra-red sensing/ TOF sensing/ Capacitive sensing/ Microwave sensing
- Certificate: WRAS and CE approved, and meet the standards of NSF, CUPC and WM
- ADA Compliant
Industrial Smart Design
|
|
|
 |
|
 |
|
