Fontana Amancio Wall Mount Brushed Nickel Finish LED Shower Set
Our Amancio rainfall shower head with LED lights is the perfect choice if you aim for a modern shower cabin without going over the top. It is wall mounted, easy to install, in contemporary brushed nickel finish, so it can easily match the rest of your bathroom fixtures. The LED lights with create a warm glowing atmosphere and in the same time they will give you an indication of the water temperature, as they change colors accordingly. No electrical connection is necessary, they are powered by the water flow. It comes with a single handle valve, with built-in water mixer for hot and cold water. Only the best materials have been used – the valve comes with ceramic core material for a long lasting life time. It comes complete with accessories and installation instructions.
Fontana Amancio Wall Mount Brushed Nickel Finish LED Shower Set Features:
Brand Name: FontanaShowers
Model Number: FS659LDS-N
Type: Shower Set
Cold / Hot Water Control Type: Single Holder Dual Controls
Before You Begin, Please Read The Installation Instructions Below. Observe All Local Building And Safety Codes.
Unpack And Inspect The Product For Any Shipping Damages. If You Find Damages, Do Not Install.
Please Note All Showers Must Be Installed By A Professional And Certified Plumber Otherwise Warranty Might Be Voided.
shower
Shower Head Installation Instructions
Step 1:
shower
Step 2:
Step 3:
Step 4:
Step 5:
1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon.
2. Insert the new arm into the fitting in the ceiling and twist to tighten. Finish tightening with your adjustable wrench. Wrap a dry cloth around the shower arm to protect the finish while tightening with an adjustable wrench.
3. Thread the new shower head onto the arm and hand-tighten. Hold the shower arm in place with groove joint pliers and finish tightening the shower head with your adjustable wrench. Wrap both in a dry cloth to protect the finish.
4. Before securing the decorative escutcheon, turn on the water supply to make sure that all connections are tight and there is no leaking. If no leaks are detected, continue with the installation. If leakage does occur, use your adjustable wrench to tighten the connections as necessary.
5. Apply a bead if silicone sealant to the back of the escutcheon and press firmly into place against the installation surface. Wipe away any excess sealant with your damp cloth.
Thermostatic Mixer Installation Instructions
Step 1:
Step 2:
Mixer
Valve
Mixer Control Valve Installation Instructions
1. Fix the shower valve into the wall with nuts and screws. Use a level to ensure that the valve is straight and level. (Important: Flush the water supply to remove any dirt and debris before installing the valve body.)
2. Wrap Teflon tape around the pipe threads. Connect hot and cold water supply lines and all the in-wall pipes (not included) as desired to the shower valve.
3. Turn on the water supply and open the cartridge. Make sure that no leakage occurs. (Note: Test the water pressure after the pipe connections have been made and before the finished wall material is installed.)
4. Put on the protective cover and finish the wall surrounding the shower.
5. Remove the protective cover when the finished wall is complete. Then, install the escutcheon and press it against the finished wall.
6. Install the handle to the valve and tighten the set screw. Then, put on the indication button.
