Fontana Bluetooth Shower Head 3 Functions Thermostatic Mixer Shower Set
The Bluetooth Head Brass shower set 3 functions thermostatic mixer body jet, rainfall and hand shower & mirror sus304 shower head, square 15.7"x11.8", ultra-thin with FM radio and Bluetooth. This shower set is the ideal solution for creating a striking contemporary bathroom. Concealed thermostatic mixer, high quality, brass material,3 functions, with embedded box. First, it's shower set 3 functions thermostatic mixer, to protect you won't be scalded by hot water. Easy to repair, you won't damage your wall of the bathroom when you need repair, your shower set, just only take out the shower plate to repair. To save much more space using the concealed box, because main fittings have been assembled inside the box.
Fontana Rauma 3 Functions Thermostatic Mixer Shower Set Features:
Brand Name: FontanaShowers
Model Number: FS9694
Valve Core Material: Ceramic
Type: Fixed Support Type
Number of Handles: Dual Handle
Size of Shower Head: 15.7"x11.8"
Finished: Chrome
Surface Treatment: Polished
Cold/Hot Water Control Type: Single Holder Dual Control
Style: Contemporary
Multi Functional Shower Head: Bluetooth Shower Head
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
shower
Shower Head Installation Instructions
Step 1:
Step 2:
shower
shower
Shower Head Installation Instructions
Step 3:
Value Installation Instructions
Body Jets Installation Instructions
Body Sprays Installation Instructions
Step 1:
Step 2:
Step 3:
Body
Sprays
Body Sprays
Set the decorative cover on the body jet.
Roll the raw material belt in the thread screws.
Use a wrench to tighten 6 body jets on the water outlet holes in a clockwise direction.
Body Sprays Installation Instructions
Hand-Held Shower Installation Instructions
Step 1:
Step 2:
Step 3 & 4:
Hand
Held
Shower
Hand Held Shower
Handheld Shower
Handheld Shower
Handheld Shower
Step 5:
Step 6 & 7:
Step 8:
1. Gather All Parts
2. Hole Locations For Wall Mount
Remove Front Cover (A) from Wall Mount (B). Use Wall Mount Screw Holes (C) to place the desired location. Using a punch or awl, tap the screw hole locations. Holes must be vertically aligned.
3. Anchor Installation
Drill two 1/4” dia. Holes (A). If installing into a studs drill two 1/8” dia. holes and do not use Anchors (B). Insert Anchors (B) into Holes (A) and tap flush with the wall.
4. Wall Mount Installation
Place Wall Mount (A) into wall and inset Mounting Screws (B) through Wall Mount Holes (C) and tighten until Wall Mount (A) is flush with the wall. Do Not Over Tighten! Insert Front Cover (D) into Wall Mount (A)
5. Drop Elbow & Hose Installation
Apply PTFE plumbers tape on both ends of Pipe Nipple (A) (not included). Screw Pipe Nipple (A) into the elbow inside the wall. The Pipe Nipple (A) is to project 1/4” – 3/4” from the finished wall. Screw Drop Elbow (B) onto Pipe Nipple (A) and tighten until Drop Elbow (B) is property positioned and flush to the finished wall. Place Rubber Seal (C) inside Hex Hose Fitting (D). Connect Hex Hose Fitting (D) into Drop Elbow Outlet (E) by turning Hex Hose Fitting (D).
6. Unit Startup
Turn on hot and cold water supplies, and check all connections for leaks.
7. Final Flushing
For final flushing, turn the valve on and allow water to run through the Hose (A) for several minutes. Allow water to run for several minutes until all foreign matter clears the line.
8. Shower Arm Installation
Place Rubber Seal (A) inside Tapered Hose Fitting (B). Conned Hand Shower (C) to Hose (D) by turning Tapered Hose Fitting (B ) clockwise. Warning: Make sure Hand Shower (C) is securely tightened to Hose (D).