Fontana Riviera™ Series Gun Metal Grey Automatic Wall Mounted Motion Sensor Faucet
The Gun Metal Grey Fontana Riviera™ Series is the very quintessence of contemporary elegance, augmented by state-of-the-art motion detection for architectural precision. A strong metallic surface charged with seeming energy contrasts with the starkness of a modernized interior, yet there is an utterly indomitable class hidden beneath.
That is an infrared sensor technology providing an ultrafast and touchless operation, promoting good hygienic practice and low maintenance for use in high traffic areas. Solid brass formation offers sheer durability with corrosion resistance to ensure steady performance under trying conditions, while the ceramic valve core ensures smooth and precise control of water flow rate under any pressure variation, thus aiding utility and comfort. Wall mounting saves countertop space and supports the very minimalist foyer that is so easy to clean. Double power supply, AC and DC options, thus easy to implement in any establishment; balanced G1/2" connections allow steady water flow into supply with minimal splash. Engineered to meet architectural coordination requirements through controlled dimensions, projection limits, and standardized mounting centers.
Read More
FontanaZeniora™ Gun Metal Grey Wall Mounted Automatic Sensor Faucet FAQ
Infrared Touchless Activation, Ceramic Valve Control;
AC/DC Power & Gun Metal Grey Surface Protection
The FontanaZeniora™ Gun Metal Grey Automatic Wall Mounted Motion Sensor Faucet
combines solid-brass construction with a ceramic valve core, infrared touchless
activation, and a contemporary single-hole wall-mounted configuration. The
faucet supports AC/DC power, uses G1/2-inch inlet and outlet connections,
and is engineered for hygienic commercial and residential washroom applications
where dependable hands-free operation and concealed wall coordination are required.
How should the infrared sensor field be commissioned after final installation?
Complete sensor commissioning only after the basin, finished wall, mirror,
lighting, partitions, soap accessories, and surrounding fixtures are fully
installed. Test repeated hand-entry and withdrawal cycles from normal
washing positions and confirm prompt water activation followed by complete
automatic shutoff. Check mirrors, polished stone, metallic accessories,
and other reflective surfaces for unintended infrared interaction before
placing the faucet into regular service.
How should the G1/2-inch concealed wall connections be coordinated?
Establish the finished-wall plane, basin centerline, faucet mounting
elevation, concealed G1/2-inch inlet and outlet routing, and electrical
service access before closing the wall. Maintain rigid structural support
for the faucet body and ensure concealed connections are aligned without
excessive stress or side loading. Position the outlet so water discharges
into the primary washing zone without striking the rear basin wall,
drain assembly, or shallow bowl edge.
What should be checked if water flow or automatic shutoff becomes inconsistent?
Flush the incoming water supply before final connection and inspect the
G1/2-inch supply path, service valves, internal passages, and outlet for
sediment or installation debris. If infrared detection remains reliable
but flow becomes weak, delayed, or fails to shut off completely, troubleshoot
the ceramic valve and hydraulic path separately from the electronic sensor.
Also verify stable AC/DC power and secure wiring connections before replacing
control components.
How should the Gun Metal Grey finish and sensor area be maintained?
Clean the exposed Gun Metal Grey brass surfaces with a soft damp microfiber
cloth and dry them after cleaning to reduce fingerprints, soap film, and
mineral deposits. Keep the infrared sensor area free from residue that could
interfere with reliable detection. Use diluted pH-neutral soap when necessary
and avoid abrasive pads, steel wool, acidic descalers, bleach, ammonia,
aggressive metal polish, scouring compounds, and concentrated chemical
cleaners that may scratch or alter the Gun Metal Grey finish.
Read More
- Brand Name: FontanaShowers®
- Model Number: FS1487GMG
- Type: Touchless Bathroom Faucet
- Style: Contemporary
- Finish: Gun Metal Grey
- Material: Brass
- Valve Core Material: Ceramic
- Installation Type: Wall Mounted
- Number of Holes: Single Hole
- Power: AC/DC
- Diameter of Inlet Pipe: G1/2"
- Diameter of Outlet Pipe: G1/2"
- Usage: Commercial/Residential
Industrial-Modern Touchless Control
|
Gunmetal Zen 
