So, what are you waiting for? Order your Commercial Deck Mounted Gold Automatic Touchless Infrared Hot and Cold Sensor Faucet today! By reducing water waste and promoting efficiency, Fontana touchless faucets are a more environmentally friendly and sustainable choice for touchless commercial bathrooms. Commercial Sensor Faucet System; Engineered with infrared activation, controlled discharge, and durable performance.

Solo Sensor Activated Faucet Special Features

• Hands-free operation is ideal for commercial use applications in public restrooms, restaurants, office buildings, and public facilities. Fits all standard US plumbing.
• Intelligent: with its micro-computer controlling its action, the faucet will self-adjust its best detection zone as per the color and shape of the lavatory
• Flashing light indicator; a diagnostic indicator for power up, low battery, and solenoid function.
• The meanings of the codes are described in the installation instructions.=
• The faucet can be mounted to any sink surface.
• ADA Compliant.
• Batteries life is 8,000 cycles per month and with enough water pressure is approx 5 years service life of the batteries.
• Adjustable sensing range; while the factory range is set about 4"to 5"from the sensor, it can be adjusted.

Fontana Matte Black Contemporary Commercial Deck Mount Sensor Faucet FAQ

25 cm Infrared Detection, DC 6V Power; 0.05–0.7 MPa Operation & Matte Black PVD Protection

The Fontana Matte Black Contemporary Commercial Deck Mount Sensor Faucet combines hands-free infrared activation with a single-hole deck-mounted commercial configuration. The faucet uses DN15 / G1/2-inch supply connections, operates across a 0.05–0.7 MPa water-pressure range, supports DC 6V power with four AA batteries, provides an approximately 25 cm sensing distance, includes a low-battery LED indicator, and features a durable Matte Black PVD finish.

How should the approximately 25 cm infrared sensing distance be commissioned?

Complete sensor commissioning only after the basin, countertop, mirror, lighting, backsplash, and surrounding restroom accessories are fully installed. Test repeated hand-entry and withdrawal cycles at the specified approximately 25 cm sensing distance and verify consistent touchless activation. Check mirrors, polished stone, metallic accessories, and nearby movement for unintended infrared triggering before placing the faucet into regular commercial operation.

How should the 0.05–0.7 MPa operating pressure range be verified?

Flush the supply piping before final connection and confirm that dynamic pressure remains within the specified 0.05–0.7 MPa range during operation. Inspect the DN15 / G1/2-inch supply path, service connections, inlet filtering, and outlet components if flow becomes weak or irregular. Hydraulic restrictions should be corrected before sensor or electronic control components are replaced.

How should the DC 6V battery system and 60-second safety cutoff be checked?

Install four AA batteries according to the control-module polarity and verify the low-battery LED indicator during commissioning. Perform repeated activation cycles and confirm rapid sensor response and reliable valve shutoff. The faucet is designed to automatically stop water flow after approximately 60 seconds of continuous activation, so this protection should also be verified during final commissioning.

How should the Matte Black PVD finish and sensor window be maintained?

Clean the exposed Matte Black surfaces with a soft damp microfiber cloth and dry them after cleaning to minimize fingerprints, soap film, and mineral deposits. Keep the infrared sensor window free from residue that could interfere with reliable detection. Use diluted pH-neutral cleaner when necessary and avoid abrasive pads, steel wool, acidic descalers, bleach, ammonia, aggressive metal polish, and concentrated chemicals that may scratch, burnish, or damage the PVD finish.

Matte Black