The FontanaShower Brushed Gold Touchless Bathroom Sink Faucet is an epitome of fashion, convenience, and hygiene all combined with just the right touch for any bathroom. The beautiful brushed gold finish exudes maximum luxury with further resistance to tarnishing and scratches.
This faucet features the latest in infrared sensor technology for contactless operations. The spout design is a waterfall, providing a continuous and laminar water flow, whose features are very similar to those of a natural waterfall. This makes the bathroom tranquil and full of elegance. With the standard flow rate of about 1.5 to 2.2 GPM, this faucet strikes a great balance in conserving water while providing enough water pressure for tasks. The faucet offers modern technologies, aesthetic appeal, and hygiene in this bathroom fitment with a luxurious and user-friendly element to add into space. Protected Touch-Free Faucet System; System-level solution featuring secure mounting, vandal-resistant components, and intelligent automatic operation.
Fontana Evry™ Brushed Gold Widespread Touchless Sink Faucet FAQ
Infrared Touchless Activation, Waterfall Flow;
9" Faucet Length & Brushed Gold Surface Protection
The Fontana Evry™ Brushed Gold Touchless Faucet combines solid-brass
construction, waterfall delivery, single-hole deck mounting, and
infrared hands-free operation in a compact architectural design.
How should the infrared sensor field be commissioned after installation?
Complete commissioning after the basin, countertop, mirror, lighting,
backsplash, and surrounding accessories are fully installed. Perform
repeated hand-entry and withdrawal cycles from normal washing positions
and confirm reliable activation followed by complete automatic shutoff.
Check mirrors, polished stone, metallic accessories, and other reflective
surfaces for unintended sensor triggering before final handover.
How should the waterfall flow be evaluated during commissioning?
Flush the supply piping before final connection and perform repeated
activation cycles under normal operating pressure. Verify that the
waterfall sheet remains smooth and centered within the basin. If flow
becomes uneven or restricted, inspect the supply path, outlet opening,
and internal waterways for construction debris or mineral accumulation
before servicing the electronic sensor components.
How should the 9-inch length and 5.75-inch height be coordinated with the basin?
Establish the single-hole mounting location relative to the actual basin
before drilling or final tightening. The approximately 9-inch overall
length and 5.75-inch height should place the waterfall outlet within the
primary washing zone without directing water against the rear bowl wall,
drain assembly, or shallow front edge. Confirm adequate hand clearance
and splash control before finalizing the installation.
How should the Brushed Gold finish and sensor area be maintained?
Clean the exposed Brushed Gold brass surfaces with a soft damp microfiber
cloth and dry them after cleaning. Keep the sensor area and waterfall
outlet free from soap film and mineral buildup. Use diluted pH-neutral
cleaner when needed and avoid abrasive pads, steel wool, acidic cleaners,
bleach, ammonia, and aggressive metal polish that may damage the finish.
Reduced Finish Complaints 
