Equipped with a motion detector, this faucet offers a hands-free experience while enhancing hygiene and limiting water wastage. There is an adjustable temperature control so one can set a precise desired temperature, while other safety features include overheating protection. Low battery indication will, therefore, ensure that the faucet will never be caught off guard and will always operate smoothly.It features electric and thermostatic controls that facilitate the stabilisation of water flow and temperature in use. This type of meter uses less water than the unintended waste, thus conserving the environment and saving on utilities, which is nice for one concerned about the environment.A contemporary look, mountable quite nicely: simple deck mount installation is designed with a single-hole configuration and includes a deck plate. Going into an upscale hotel, office building, or residence, the FontanaDiamondFlow™ integrates those qualities of functionality, efficiency, and sleek aesthetics.

FontanaDiamondFlow™ Brushed Nickel Smart Touch & Touchless Faucet FAQ

OLED Touch Control, 0.05–0.6 MPa Pressure Stability; Brushed Nickel Surface Protection

The FontanaDiamondFlow™ Brushed Nickel smart faucet combines brass construction, single-hole deck mounting, motion-sensor activation, OLED touch control, and dual touch-and-sensor operation. The faucet is designed for a 25–45 °C water temperature range and 0.05–0.6 MPa operating pressure, with integrated overheat protection for controlled commercial and residential washbasin applications.

How should the sensor and OLED touch-control functions be commissioned?

Complete commissioning after the basin, countertop, mirror, lighting, and nearby accessories are fully installed. Test the motion-sensor activation independently and confirm prompt water delivery when a hand enters the sensing zone and complete shutoff when it leaves. Then verify the OLED touch-control functions separately, confirming that touch commands and automatic sensor operation respond consistently without unintended activation from nearby reflective surfaces or movement.

How should operation across the 0.05–0.6 MPa pressure range be verified?

Flush the hot and cold supply lines before final connection and confirm that dynamic supply pressure remains within the specified 0.05–0.6 MPa range while the faucet is operating. Check for stable discharge, proper sensor-controlled opening, and complete valve closure at the end of each cycle. If flow is weak or inconsistent, inspect supply valves, strainers, inlet connections, and the water path for debris or restrictions before diagnosing the electronic control system.

How should the 25–45 °C temperature control and overheat protection be tested?

Commission temperature control only after both hot and cold supplies are stable. Operate the faucet through the intended adjustment range and verify consistent outlet-water response between 25 and 45 °C. Allow the temperature to stabilize after each adjustment and confirm that the integrated overheat protection remains functional. Temperature fluctuation should prompt checks of hot-to-cold supply balance, inlet restrictions, connection accuracy, and control settings rather than bypassing the protective function.

How should the Brushed Nickel finish and sensor surfaces be maintained?

Remove fingerprints, soap film, and water deposits using a soft damp microfiber cloth and dry the faucet immediately after cleaning. Keep the motion-sensor window and OLED control surface free of residue that could interfere with detection or touch response. Use diluted pH-neutral soap when required and avoid abrasive pads, acidic descalers, bleach, ammonia, steel wool, polishing powders, aggressive metal polish, and concentrated disinfectants that may damage or discolor the Brushed Nickel surface.

Brushed Nickel