Fontana Liverpool Ceiling Mount Thermostatic Rainfall Shower Set System
Combining quality materials on this fixtures to ensure durability, this large LED rainfall shower head is showcased in a beautiful brushed nickel finish. Overhead shower, combined with 6 body jets and a handheld shower ensure maximum coverage. Three handle mixer includes; water divider, on/off switch and temperature control to allow you to set your shower exactly the way you want. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately.
Fontana Glasgow 24" LED Ceiling Rainfall Shower Head Set With Body Jets Features:
Brand Name: FontanaShowers
Model Number: FCJ-24-LED-CEILING-SHOWER-N
Water flow rate: 18 (L/Min)
Wall elbow features: solid brass construction
Overall size: 5.1" x 11" (13 x 28 cm)
Water Outlets: Handheld Shower, Shower Head, Body Jets
Hot & Cold: Yes
Surface Finish: Brushed Nickel
Style: Contemporary
Material:Brass
Number of Handles: 3 Handle
Type: Bath, Shower & Spa
Features: Ceramic Disc, Anti Scald Feature, 1/2" NPT Inlets
Installation: Ceiling Mount Shower Head, Wall Mount Control Panel, Body Jets, and Handheld Shower
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.
shower
SHOWER HEAD INSTALLATION INSTRUCTIONS
Shower Head Installation Instructions
Shower Parts
Shower Head Installation Instructions
Step 1:
shower
Step 2:
According to the template (B) mark the location of the mounting holes (1). Use a drill with a 6mm bit to drill mounting holes into studs or blocking.
Install the mounting brackets (C) with the tapping screws (D1). Thread the shower bars (E) onto the mounting brackets, and the inlet hose (F) onto the water inlet.
Shower Head Installation Instructions
Step 3:
Step 4:
Attach the shower head (A) to the shower bars (E). Connect the inlet hose (F) to the showerhead.
Shower Head Installation Instructions
Step 5:
Shower Head Installation Instructions
HAND-HELD SHOWER INSTALLATION INSTRUCTIONS
Step 1:
Step 2:
Hand
Held
Shower
Hand Held Shower
Handheld Shower
Step 3:
Handheld Shower
SHOWER BODY JETS INSTALLATION INSTRUCTIONS
Body Sprays Installation Instructions
Step 1:
Step 2:
Body
Sprays
Set the decorative cover on the body jet.
Roll the raw material belt in the thread screws.
Body Sprays Installation Instructions
Step 3:
Use a wrench to tighten 6 body jets on the water outlet holes.
Tighten it in a clockwise direction.
Attach the positioning bar to the rough-in body (4,5) with tapping screws. Mark the location of the mounting holes.
Remove the rough-in body and drill pilot holes at the locations marked in the previous step. Insert anchors.
Shower Valve Mixer Installation Instructions
Step 5:
Step 6:
Attach the rough-in body to the wall.
Connect the rough-in body to the water supply pipes according to the diagram.
Shower Valve Mixer Installation Instructions
Step 7:
Step 8:
Finish the wall surrounding the shower with a thickness of 1/2"-1-1/2".
a) Finished wall surface should not exceed the upper edge of the installation box.
If the tile exceeds the edges of the installation box, trim the tile as necessary to install the trim plate.
b) Trim the tile around the installation box as necessary.
Shower Valve Mixer Installation Instructions
Step 9:
Remove the plastic guard and place the trim plate over the installation box. Install the screws covers, handles and buttons.
Shower Valve Mixer Installation
How to install the Shower Set with Wall Mount Showerhead, Hand Held Shower and Shower Mixer
.jpg)
