|
Step 1: Cut out a hole in the suspended (false) ceiling, install the fixture and mark the locations on the ceiling for the mounting plugs.
|
shower
|
Step 2: Make 4 Ø11 holes at the marked locations, push the mounting plugs into them and drive them home with the hammer
|
|
|
|
|
|
|
|
|
|
|
|
Step 3: Screw in 4 bolts into the plugs and lock them with the nuts.
|
|
Step 4: Cut the bolts to size, if necessary, as shown in the drawing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 5: Insert the fixture into the suspended ceiling hole.
|
|
Step 6: Adjust the installation height by turning the nuts.
|
|
|
|
|
|
|
|
|
Step 7: Hoist the fastening cables.
|
|
Step 8: Connect the supply lines.
|
|
|
|
|
|
|
|
|
Step 9: Insert the rain shower assembly into the fixture.
|
|
Step 10: Tighten the 4 mounting bolts and insert the LED shrouds.
|
|
|
|
|
|
|
|
.png)
