Home > Installation Guide for Fontana Lima Rainfall Waterfall Shower System

Fontana Lima Rainfall Waterfall Oil Rubbed Bronze Shower System

Turn your shower into a water and light show with this LED Rainfall Waterfall shower system. Comes complete with a showerhead, a hand-held shower, and adjustable body jets - all with a beautiful warm bronze finish. Six adjustable body massage sprayers and a handheld shower provide you with all-over coverage. The recessed Rainfall Waterfall showerhead is proportionally generous. Adding a touch of elegance to your bathroom, the LED lights will provide a visual water temperature indicator. Built-in hydro-powered device powers the LED lights, which provide visual shower temperature cues to reduce water waste. The lights will dim and brighten when you lower and raise the pressure so you can set the perfect mood, water, and lighting. When the water temperature is ≤89 °F (≤32 °C), the Blue color will show automatically; When the water temperature is between 97 to 107 °F (36-42 °C), the Green color will show automatically; When the water temperature is between 109 to 122 °F (43-50 °C), Red color will show automatically; When the water temperature is above 122 °F (>50 °C), Red color will flash; When water temperature is above 122 °F (>50 °C), Red color will flash immediately.

Fontana Lima Rainfall Waterfall Oil Rubbed Bronze Shower System Features:

Brand Name: FontanaShowers
Model Number: FS-892RB
Material: Solid Brass
ShowerheadFinish: Dark Oil Rubbed Bronze
Style: Contemporary Rain Showerhead
Showerhead Height (thickness): 0.33"
Showerhead Width: 14"
Showerhead Length: 20"
LED Power Source: Water Flow
LED Color: Available without color-changing or with LED colors Blue, Green, Red
Mount Method: Recessed Ceiling Mount
Connection: 1/2" US standard (included)
Body Jets: 360° Adjustable Body Jets
Body Jets size: 5" x 5"

FontanaShowers®Product Warranty Information

Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided.

shower

Shower Head Installation Instructions

Shower Parts
Showerhead lists: Showerhead 11.8" shower hose Tee joint Expansion bolt G1/2" filter net H4 inner hexagon
Shower Head Installation Instructions
Step 1:	shower	Step 2:

Through the two hexagonal nuts adjust the distance between the mounting bracket and the ceiling, and keep the mounting bracket on the level.		Use explosion screw fixed mounting bracket on the ceiling, pay attention to the explosion screw can adjust the height, and use level adjust the mounting bracket to level.
Shower Head Installation Instructions
Step 3:		Step 4:

Connect 1 pcs water hose to 1 Tee Joints and G1/2, G1/2 joint in the middle, then put another side of the shower hose through the hole of shower head size.		Install the decorative panel, use SW4 hexagon wrench tighten 4 screws.