Striking a confident balance between bold architectural styling and intelligent touch-free performance, the Fontana Brio PrimeSense™ Line Gun Metal Gray Classic Touchless Bathroom Faucet brings a sophisticated commercial aesthetic to modern washrooms. The premium Gun Metal Gray PVD finish introduces depth and visual contrast while complementing stone countertops, matte basins, brushed metals, and contemporary interior palettes. Constructed from solid brass with a deck-mounted single-hole configuration, the faucet delivers long-term structural stability and corrosion resistance for luxury residential spaces as well as demanding commercial environments.
Engineered around the Brio PrimeSense™ intelligent sensing platform, the faucet utilizes a self-adapting infrared sensor with a field-adjustable 16–32 cm detection zone, allowing precise commissioning for different basin geometries while minimizing false activation and unnecessary water consumption. Its precision control module coordinates rapid touch-free activation with an integrated automatic shut-off system, 30-second safety timeout, and hygienic line flush function to maintain cleaner water pathways during intermittent operation. Delivering 1.2 GPM (4.54 L/min) at 60 PSI, the commercial-grade hydraulic assembly incorporates a motorized valve engineered for up to 500,000 operating cycles, Quick Connect installation fittings, and intelligent water usage and battery-status monitoring, providing dependable water control with exceptionally low standby power requirements.
Designed for airports, hotels, healthcare facilities, office buildings, and other high-traffic commercial washrooms, the Brio PrimeSense™ faucet combines premium aesthetics with specification-grade reliability. Operating within a 0.05–0.8 MPa water pressure range, it supports consistent hydraulic performance while conserving water through a controlled 6-liter discharge cycle. Compliance with
ASME,
CSA,
ADA, and
WaterSense,
requirements further reinforces its suitability for projects requiring verified standards for accessibility, water efficiency, hygiene, durability, and long-term commercial performance.
|
Specification
|
Performance
|
| Power Supply |
220–240V AC, 50/60Hz or DC 6V Using 4 × AA Batteries |
| Sensor Detection Range |
16–32 cm (Adjustable) |
| Sensor Opening Time |
< 1 Second |
| Sensor Closing Time |
< 2 Seconds |
| Automatic Safety Shut-Off |
30 Seconds |
| Water Flow Rate |
1.2 GPM (4.54 L/min) @ 60 PSI |
| Motorized Solenoid Valve Life |
Up to 500,000 Operating Cycles |
| Water Connection |
G1/2" Inlet and Outlet Connection |
BRIO PRIMESENSE™ LINE
Brio PrimeSense™
Technical FAQs
Commercial infrared touchless faucet with solid brass
construction, PVD finish, electronic valve control,
adjustable sensing, and 1.2 GPM water-saving performance.
✥ Sensor Calibration Procedure? +
Complete sensor commissioning after the basin,
backsplash, countertop and surrounding accessories
are installed. Confirm reliable hand detection
throughout the intended sensing field and adjust
the sensor range where required.
◇ Hydraulic Checks During Installation? +
Flush the supply line before final connection,
confirm service stops are fully open, inspect
inlet filtration for debris, and verify secure
supply fittings before commissioning.
◯ Flow Rate Verification? +
Verify approximately 1.2 GPM under normal dynamic
operating conditions. If output is restricted,
inspect the aerator, inlet filters, service stops,
and available water pressure.
↻ Continuous Water Flow Diagnostics? +
Clean the infrared sensor window, remove reflective
objects from the sensing field, verify stable
electrical power, and inspect the electronic valve
for debris or incomplete seating.
⌁ Sensor Detection Range? +
The adjustable sensing field allows commissioning
for different basin and countertop geometries while
reducing unintended activation from nearby
reflective surfaces.
⌂ Operating Water Pressure? +
Maintain stable dynamic inlet pressure within the
specified operating range. Excessive pressure should
be regulated, while low dynamic pressure may reduce
available flow.
⚡ Power Supply Options? +
Verify the specified AC or battery power
configuration before commissioning the infrared
sensor and electronic valve assembly.
⌕ Routine Maintenance Requirements? +
Periodically clean the sensor window and aerator,
inspect inlet filtration, remove mineral buildup,
and verify reliable electronic valve shutoff during
scheduled maintenance.
Gun Metal Gray
♧
1.2 GPM Water Efficient
◇
Solid Brass Durable Construction
⌁
Infrared Sensor Hygienic & Reliable
⚙
Electronic Valve Precision Control
◇
Commercial Grade Built to Perform
